One press from bed runs the room: what this Zigbee button does

A small white disc on your bedside table. Press it once, twice or hold it, and the linked devices run the scene you chose. It needs a Tuya Zigbee gateway first. Here is how it works and who should skip it.

Product page

Pack 1
Standard shipping to Columbus: 4–6 daysStandard shipping to Columbus: 4–6 daysProcessing 2–5 business days. Tracked to your door.
Zigbee smart button with 3 press gestures, CR2032 battery included$27.99
Tracked shippingIncluded
Taxes & import dutiesMay apply at your door
You pay$27.99
or
Questions? Email help@viversio.com. We reply within 1 working day.
Tracked to your door. Processing 2–5 business days, then standard shipping.
Covered if it's faulty Repair, replacement or refund. Change-of-mind returns only where the law gives that right. Your legal rights always apply.
Secure checkout by Stripe. We never see your card details.

Press once, and the gateway runs the scene

  1. You press the top face

    A single press, a double press or a long press. Your finger meets a flat round disc, 50 × 50 mm. There is nothing else to learn.

  2. The button sends it over Zigbee

    The signal goes to your Tuya Zigbee gateway, which is linked to your Wi-Fi router. The button never talks to the router itself.

  3. The gateway runs what you set

    In the Smart Life app, each gesture gets its own action. For example, a single click turns a light off and a double click turns it on. The long press is free for a third scene.

  4. The linked device answers

    Bulbs, smart plugs for the AC, fan or floor lamp, a dimmer switch and a curtain motor can all respond. The result happens at the device, not on the button, so you hear the plug click or watch the curtain move across the room.

Press once in bed. The room answers.

The lamp and the curtain motor answer to a button within reach of your hand. You stay under the covers.

A small white round Zigbee button resting in a bright room

Check the gateway first, then it works from day one

  1. Make sure you have a Tuya Zigbee gateway

    This is the one thing to settle before anything else. The button needs the gateway to work. It does not connect straight to your router. If a gateway already sits on your Wi-Fi, you are most of the way there.

  2. Have Tuya devices to control

    The gateway triggers linked Tuya devices such as bulbs, smart plugs, a dimmer switch or a curtain motor. Pick the ones you want to answer the button.

  3. Choose what each gesture does

    In the Smart Life app, give the single press, double press and long press their own scene. Keep it simple: one press for off, two for on.

  4. Put it where your hand goes

    It sits loose on a desk or bedside table, or lies flat against a wall or other surface. A CR2032 coin cell powers it and the battery is included, so there is no cable and no outlet to find.

Who gets the most from this button

  • You already run Tuya or Smart Life devicesThe button adds a physical control to what you have. Guests and family can press it without opening an app.
  • You have a Zigbee gateway, or plan to add oneWith the gateway in place, the button pairs in and each gesture runs its own scene.
  • You want one control in a fixed spotA bedside table, a desk or a wall by the door. It stays where you put it, with no wires to hide.

See how small it is before you place it

A round white Zigbee button on a light grey background
The round white disc, flat on a light surface.
A hand holding the small white round button to show its size
In a hand, 50 × 50 mm.
Side view of the white round Zigbee button
Side view of the slim body.
The white Zigbee button placed at home ready to be pressed
In use at home.

What buyers say

From people who bought this exact product on other sites, not from Viversio. Every rating counts in the score, the low ones too.

4.7
200 ratings

Buyer reviews of this same product, published on other sites. We check the item matches, not each purchase.

133 ratings have no written review, only talk about delivery or were filtered as spam, so they aren't listed. They still count in the score.

  1. DOES NOT WORK with ZigBee! This is a 1 Button device but it has the firmware of a 6 Button device. My reading suggests that this is a common failure of manufacturers of cheap ZigBee buttons/switches/remotes. Home Assistant forums have many threads complaining about this problem on many different devices. The actual button does not toggle any of the SIX "switch" controls detected by Home Assistant.

    A buyerUnited StatesBought: 1Pcs Zigbee

  2. Came fast and without any damage. Battery was included. You need a zigbee hub like it says in description and you can use it to control other zigbee devices. You might need some tweaking to use it with non-zigbee devices so I would recommend that your light bulbs are also zigbee.

    H.CroatiaBought: 1Pcs Zigbee

  3. Very excellent devices, through Tuya Zigbee gateway. Instant connect, scenes no delay, three modes, one click, two click, long press giving 3 possible scenes modes

    A buyerUnited KingdomBought: 1Pcs Zigbee

  4. Everything was fine with the delivery and the product. Working perfectly on SmartLife via Zigbee.

    A buyerBrazilBought: 1Pcs Zigbee

  5. Works very well and is recognized very quickly on Smart Life via a Zigbee hub.

    A buyerFranceBought: 1Pcs Zigbee

  6. Works very well. Connects with HOME assistant in 2 seconds.

    A buyerFranceBought: 4Pcs Zigbee

Specs at a glance

ModelZigbee Scenario Switch
Switch typePush button switch
Size50 × 50 mm
Power sourceCR2032 coin cell
Battery includedYes
CommunicationZigbee
CertificationCE
Works withAlexa, Google Home, Tuya / Smart Life
NoteNeed to work with Zigbee Gateway
Pack1, 2, 4, 8

Questions to settle before you decide

Is it worth it if I have no Zigbee gateway yet?

Only if you plan to add one. The button does nothing alone. It sends its press over Zigbee to a Tuya Zigbee gateway, and the gateway runs the scene. If one switch is all you want and you have no gateway, this is not the right fit.

Can one button do more than on and off?

Yes. A single press, a double press and a long press can each run a different scene. A single click can turn a light off, a double click can turn it on, and the long press can run something else you set.

Where can I put it?

It sits loose on a desk or bedside table. You can also lay it flat against a wall or another surface. It is a small round disc, 50 × 50 mm.

Does it need wiring or a charger?

No. It runs on a CR2032 coin cell, and the battery is included. It is a trigger, so the light, plug or curtain motor it controls does the work.

Does it work with Alexa or Google Home?

It is listed as working with Alexa, Google Home and Tuya / Smart Life. You still need the Zigbee gateway in every case.

Can I buy more than one?

Yes. The button comes in packs of 1, 2, 4 and 8, which suits one button per room.

Before you order

Delivery to Columbus

Every step is tracked. The tracking link comes by email, in your language. 4–6 days.

The courier may collect import duties or taxes on delivery.

Covered if it's faulty

Damaged, wrong or not as described: tell us within 14 days of delivery. A fault in normal use: within 30 days. Email us a photo or video and we repair, replace or refund. If we need it back, we pay the postage and inspect it first.

Your legal right to withdraw

In the EU, the UK and some other countries you can also cancel within 14 days of delivery for any reason. That's your legal right. You pay the return postage.

Not the right fit? Look at these instead