PIR motion sensor light switch, 110° cone, AC 85-265 V

The light comes on when someone steps into the room and goes off once they leave. No one walks into the dark.

4.7 from 37 buyer ratings
Standard shipping to Columbus: 5–6 daysStandard shipping to Columbus: 5–6 daysProcessing 2–5 business days. Tracked to your door.
PIR motion sensor light switch, 110° cone, AC 85-265 V$27.99
Tracked shippingIncluded
Taxes & import dutiesMay apply at your door
You pay$27.99
or
Questions? Email help@viversio.com. We reply within 1 working day.
Tracked to your door. Processing 2–5 business days, then standard shipping.
Covered if it's faulty Repair, replacement or refund. Change-of-mind returns only where the law gives that right. Your legal rights always apply.
Secure checkout by Stripe. We never see your card details.

What it does

This PIR motion sensor light switch turns the hall light on the moment someone steps into the room, so no one carries groceries into the dark or hunts for a switch with full hands. The sensor reads movement in a 110° cone at 4 to 6 m, then switches the light off after the delay you set: 5 sec, 45 sec or 5 min.

This wired pir motion sensor switch mounts in a wall or ceiling and switches a lamp on when a person moves in front of it. It works when the room is dim enough, and the light goes off again after the delay you set. Nothing is recorded and nothing reaches your phone. It is a mains switch with a PIR infrared detector behind the dome lens, and that is all it does.

For set-up, the head pushes through a hole of about 25.5 mm and is held by its threaded barrel and front flange, with the dome lens facing out and the two slide switches on the rear. The 4-wire lead ends in a white plug-in connector: brown is live in, yellow is the switched live to the lamp, one blue is neutral in and the other blue is neutral to the lamp, with the lamp sitting between yellow and blue. Mains is AC 85-265 V. The infrared motion sensor switch then turns the lamp on when someone moves into its 110° cone at 4 to 6 m, and off again after the chosen delay.

It suits hallways, stairs, landings and any ceiling where you want the light to answer movement instead of a switch. It also needs a hole and mains wiring at the mounting point, so it is not a surface-mount or battery device.

Every order is tracked to your door. Orders are processed in 2–5 business days, and the standard shipping time for your country is shown next to the price.

  • The room lights up when someone walks inThe sensor reads movement in a 110° cone at a range of 4 to 6 m, stated up to 8 m. When a person steps into that cone and the room is dim enough, the lamp switches on. You stop walking into dark hallways, and a lamp is not left burning in an empty room.
  • You decide how long the light stays onA slide switch on the rear sets the delay to 5 sec, 45 sec or 5 min. Pick 5 sec for a passage you walk straight through, or 5 min for a room where someone sits still. Once the person leaves the cone, the light switches off after that delay.
  • It only lights the room when it is dark enoughThe second slide switch sets the light level across about 2 to 2000 lux, with three positions: Deep dark, Light dark and All day. Set Deep dark and the lamp stays off in daylight. Set All day and it responds in any light.
  • Fits through a 25.5 mm hole in wall or ceilingThe round white head pushes through a hole of about 25.5 mm and is held by its threaded barrel and front flange, with the dome lens facing out. Its 4-wire lead ends in a white plug-in connector: brown is live in, yellow is the switched live to the lamp, and the two blues are neutral. This led motion sensor switch feeds the lamp through that yellow wire.

What buyers say

From people who bought this exact product on other sites, not from Viversio. Every rating counts in the score, the low ones too.

4.7
37 ratings

Buyer reviews of this same product, published on other sites. We check the item matches, not each purchase.

29 ratings have no written review, only talk about delivery or were filtered as spam, so they aren't listed. They still count in the score.

  1. Product as described, be careful because it is not for outdoor use; a little rain and it burns out. I tried sealing all the points where water could get in with hot glue, but it didn't help. However, for dry locations it's great. Recommended seller and fast shipping.

    C.Italy

  2. As described. Arrives without instructions. The delivery was terrible, it arrived at a collection point in another town.

    A buyerItaly

  3. This is not my first purchase. The store is good. The sensor works perfectly and has been working for over a year now.

    A buyerUkraine

  4. super useful for automation, you can calibrate time, very good

    C.Mexico

  5. I am using it very satisfactorily. Installation is easy as long as you connect the live wire properly, and it works immediately.

    H.South Korea

  6. Haven't used it yet. But has the design changed? There's no adjustment button on the back.

    A buyerSouth Korea

Specs

TypePIR infrared motion sensor switch
Input voltageAC 85-265 V
Detection angle110°
Detection range4 to 6 m, stated up to 8 m
Light level settingsDeep dark, Light dark, All day (about 2-2000 lux)
Delay settings5 sec, 45 sec, 5 min
Mounting holeAbout 25.5 mm
Wiring4-wire lead (brown, yellow, 2 blue) with plug-in connector
Switch typeSensor switch
MaterialPlastic
Smart deviceNo
CertificationsCE, ROHS
  • ROHS
  • CE

Delivery to Columbus

Every step is tracked. The tracking link comes by email, in your language.

  1. Order placedYou get a confirmation straight away.
  2. Processed and handed to the courierTracking number sent to you.
  3. Flies to United StatesThe courier may collect import duties or taxes on delivery.
  4. At your doorEstimated from recent deliveries to your country.

Returns

The short version. The returns page has the full rules.

Covered if it's faultyDamaged, wrong or not as described: tell us within 14 days of delivery. A fault in normal use: within 30 days. Email us a photo or video and we repair, replace or refund. If we need it back, we pay the postage and inspect it first.
Your legal right to withdrawIn the EU, the UK and some other countries you can also cancel within 14 days of delivery for any reason. That's your legal right. You pay the return postage.

Questions

Will it fit in my ceiling or wall?

Yes. The round sensor head pushes through a hole of about 25.5 mm and is held by its threaded barrel and front flange, with the dome lens facing out. You need that single hole at the mounting point.

Does it work on a 110 volt circuit?

Yes. The input is AC 85-265 V, so a motion sensor switch 110v install works at that voltage.

Do I need an app, a hub or a remote?

No. The sensor is not a smart device and has no app, phone or remote control. Everything is set with the two slide switches on the rear of the head: light level and delay.

What do the four wires do?

Brown is live in, yellow is the switched live to the lamp, one blue is neutral in and the other blue is neutral to the lamp. The lamp sits between the yellow wire and a blue wire, and the lead ends in a white plug-in connector.

Can it work in daylight as well as at night?

Yes. The light-level slide switch covers about 2 to 2000 lux with three positions: Deep dark, Light dark and All day. All day makes it respond whatever the light is, and the other two keep it off until the room is dim enough.

How long does shipping take?

Orders are processed in 2–5 business days. Standard shipping to United States then takes 5–6 days, and every step is tracked.

Will I pay anything when it arrives?

Possibly. Import duties and taxes for United States aren't prepaid yet, so the courier may collect them on delivery. Nothing is added to our price at checkout.

Who is Viversio?

Viversio is a brand of Ravinaro LLC, a company registered in the United States. We choose every device for what it does, and a real person answers every email.