Magnetic levitation moon lamp, 14 cm moon, touch switch

A 14 cm moon floats 15 mm above a wood-grain base and lights up at a tap. Buy two: one to keep, one to give.

Pack 1 lamp

This one doesn't ship to United States yet

We're still confirming tracked delivery for it. Pick another country to see its price and shipping time.

Questions? Email help@viversio.com. We reply within 1 working day.
Tracked to your door. Processing 2–5 business days, then standard shipping.
Covered if it's faulty Repair, replacement or refund. Change-of-mind returns only where the law gives that right. Your legal rights always apply.
Secure checkout by Stripe. We never see your card details.

What it does

A moon that hangs in the air above its base gives a room something to look at before you even switch it on. This magnetic levitation lamp floats a 14 cm moon 15 mm above a wood-grain base, and a tap on the base turns the light on.

This magnetic levitation moon lamp is a light you look at as well as use. A 14 cm moon, 3D printed with a cratered surface, floats 15 mm above its base on magnetic force. Switched off, it sits on a shelf as an object in the room. Tapped on, it glows as a night light for the hours after dark.

It needs a flat surface and a wall socket. The base is 13.4 × 13.4 × 2.8 cm in a dark wood-grain finish, so it fits a shelf, bedside table or desk, and the 12 V 1 A power adapter has an Australian plug. You switch the light with the touch switch in the base. Order one lamp, or two in one parcel: one to keep, one to give.

The first time takes a little practice. Plug in the base, hold the moon about 15 mm above the middle of the base and move it slowly until you feel it settle, then let go. If it is off-centre, the magnet pulls it to one side, so start again from the middle. Lift the moon away before you unplug the base, or it drops onto it.

It is made for atmosphere rather than reading or task light, so keep a proper desk lamp for that work. The base holds strong magnets and the power cord runs to the wall, so keep the lamp out of reach of young children.

Every order is tracked to your door. Orders are processed in 2–5 business days, and the standard shipping time for your country is shown next to the price.

  • A moon that hangs in the airMagnetic force holds the moon 15 mm above the base, with nothing touching it underneath. The moon is 14 cm across and 3D printed with a cratered surface, so it still reads as an object on the shelf in daylight.
  • Light at a tap on the baseA touch switch sits in the base, so you tap the base to turn the light on and off. There is no cord switch to find in the dark.
  • Takes a shelf, not the whole tableThe moon is 14 cm across and the wood-grain base is 13.4 × 13.4 × 2.8 cm. That leaves room for a book, a phone or a glass beside it.
  • Australian plug, one or twoIt runs from a 12 V 1 A power adapter with an Australian plug, straight into a wall socket at home. Order one, or two in one parcel: one to keep, one to give.

Specs

Moon diameter14 cm
Float height15 mm above the base
Moon3D printed
BaseWood grain, dark brown, 13.4 × 13.4 × 2.8 cm
SwitchTouch switch in the base
Power12 V 1 A adapter
PlugAustralian

Delivery to Columbus

Every step is tracked. The tracking link comes by email, in your language.

  1. Order placedYou get a confirmation straight away.
  2. Processed and handed to the courierTracking number sent to you.
  3. Flies to United StatesThe courier may collect import duties or taxes on delivery.
  4. At your doorEstimated from recent deliveries to your country.

Returns

The short version. The returns page has the full rules.

Covered if it's faultyDamaged, wrong or not as described: tell us within 14 days of delivery. A fault in normal use: within 30 days. Email us a photo or video and we repair, replace or refund. If we need it back, we pay the postage and inspect it first.
Your legal right to withdrawIn the EU, the UK and some other countries you can also cancel within 14 days of delivery for any reason. That's your legal right. You pay the return postage.

Questions

Will it work with my wall socket?

Yes. It comes with a 12 V 1 A power adapter with an Australian plug, which fits a standard Australian wall socket.

Does the moon really float?

Yes. Magnetic levitation holds the 14 cm moon 15 mm above the base, with nothing touching it underneath.

How do I get the moon to float?

Plug in the base, hold the moon about 15 mm above the middle of it and move it slowly until you feel it settle, then let go. It takes a little practice the first time. If it is off-centre the magnet pulls it to one side, so start again from the middle. Lift the moon away before you unplug the base.

How big is it?

The moon is 14 cm across and the base is 13.4 × 13.4 × 2.8 cm. It sits on a shelf, bedside table or desk and needs a wall socket nearby.

Why buy two?

Two lamps come in the same parcel: one to keep, one to give.

Can I put it in a child's room?

Keep it out of reach of young children. The base holds strong magnets and the power cord runs to the wall. It is a lamp for atmosphere, not a toy.

Will I pay anything when it arrives?

Possibly. Import duties and taxes for United States aren't prepaid yet, so the courier may collect them on delivery. Nothing is added to our price at checkout.

Who is Viversio?

Viversio is a brand of Ravinaro LLC, a company registered in the United States. We choose every device for what it does, and a real person answers every email.