How to Choose, Set Up, and Use a Magnetic Floating Globe Lamp
A magnetic floating globe with blue and white LEDs is a decorative accent lamp that suspends a spinning globe in a black C-shaped base. Here is how to choose, set up, and use one.

In this guide
A Magnetic floating globe with blue and white LEDs, 12 V is a decorative accent light that uses magnetic levitation to suspend a spinning globe inside a black C-shaped base. It produces under 60 lumens of blue and white light. That suits ambiance on a desk or shelf but not reading or task work. If you want a conversation-piece lamp that adds a quiet glow to a room and accept that it needs a wall outlet, this is a solid choice.
What you are getting
- Table lamp with a black C-shaped base and a floating globe in silver, blue, or gold
- LED light source producing under 60 lm in blue and white, included with the lamp
- 12 V DC input via a round jack, powered from a 110 V or 220 V mains adapter
Short answer
The Magnetic floating globe with blue and white LEDs, 12 V works well as an accent lamp that floats a spinning globe above blue and white LEDs in a black C-shaped base. Its luminous flux sits under 60 lm, so it sets a mood without lighting a workspace, and it runs from mains power through a 12 V adapter with no batteries or app to manage. Buy it if you want a decorative desk piece that draws attention, skip it if you need a reading lamp or a smart-home device you can control from your phone.
What the magnetic floating globe actually is
The lamp is a table lamp with a modern style and a black body. A C-shaped base stands upright on a flat surface, and a world-map globe floats in the gap between the two arms of the C, held up by magnetic levitation with nothing touching it. No pole, stand, or axis sits underneath the globe, so it turns freely in mid-air and keeps moving on its own. The globe stays visible from the front and sides while the open C frame frames it.
Blue and white LEDs glow along the inner curve of the C, beneath the floating globe. The base receives power through a round DC jack on its back-left side, fed by a mains adapter on a cable that runs off to the side. The adapter handles 110 V and 220 V supplies, and you pick the plug type for your country: US, EU, UK, or AU.
The globe is not a smart device. There is no app, no Wi-Fi, no Bluetooth, and no battery. You plug it in, and the electromagnet in the base lifts and suspends the globe while the LEDs light up. If you are browsing lighting devices for a connected, app-controlled lamp, this is not that product. It is a standalone decorative piece that happens to sit well alongside other smart-home gear, much like a sunrise alarm clock with an RGB mood light or a motion sensor night light that adds atmosphere without joining your network.
Key specifications at a glance
| Specification | Detail |
|---|---|
| Item type | Table lamp |
| Style | Modern |
| Body color | Black |
| Globe color | Silver, blue, or gold (by variant) |
| Light source | LED bulbs (included) |
| Luminous flux | <60 lm |
| Power source | AC |
| Nominal voltage | 12 V |
| Input voltage | 110 V, 220 V |
| Plug type | US, EU, UK, or AU (by variant) |
| Smart device | No |
| Batteries | Not included |
| Certifications | ROHS, CE |
| Origin | Mainland China |
Lighting output and what to expect from the glow
The blue and white LEDs produce a luminous flux of under 60 lm. That puts this lamp firmly in accent-lighting territory. It adds a quiet glow to a desk, shelf, or side table in the evening, and the floating globe catches the light as it rotates. The effect is atmospheric rather than functional.
To put that output in context, a typical 40-watt incandescent bulb produces around 400 lm. This lamp produces less than a sixth of that. You will see the globe and the inner curve of the C-shaped base lit up, and you will get some spill onto the surface beneath, but the lamp will not illuminate a page or a keyboard. If you need light to read or work by, pair it with a separate task lamp. The floating globe is the kind of piece you leave on in the evening for mood, similar to how you might use a bathroom night light with a motion sensor for a soft, low-level glow.
Decorative LED fixtures generally have long operational lives, often measured in thousands of hours, though specific ratings depend on the manufacturer's testing standards. Keeping the base in a ventilated spot, away from heat sources, is sensible.
Choosing the right variant and plug type
The lamp comes in three globe colors on the same black C-shaped base: silver, blue, and gold. The globe color changes the look of the floating piece but does not affect the LED color, which is blue and white across all variants. Silver gives a clean, neutral finish that picks up the LED glow. Blue deepens the contrast between the globe and the blue LEDs. Gold adds warmth that plays against the cool-toned light. Pick the one that matches your desk or shelf decor.
What the globe colors do well
- Silver reads as neutral and modern. It reflects LED light along its surface
- Blue creates a monochrome look with the blue LED strip
- Gold adds a warm metallic accent against the cool-toned LEDs
Things to weigh
- Globe color does not change the LED color, which is always blue and white
- All variants share the same black base and under-60 lm output
- You must select the correct plug type at purchase since the adapter is region-specific
The plug type matters because the adapter is region-specific. The lamp is listed for both 110 V and 220 V supplies, so it works in the US, across the EU, in the UK, and in Australia. You choose US, EU, UK, or AU plug when you order. If you are in the US, select the US plug. The adapter steps mains voltage down to 12 V DC through a round jack that plugs into the back-left of the base. There is no USB option and no battery backup, so the lamp runs only when connected to wall power.
Setting up the magnetic levitation base
Setup involves placing the base on a flat surface, connecting the DC jack, plugging into mains power, and placing the globe in the gap between the arms of the C.
- Place the base on a flat surfaceSet the black C-shaped base upright on a desk or table.
- Connect the DC jack to the base Plug the round DC connector into the jack on the back-left side of the base. The cable runs off to the side to the mains adapter.
- Plug the adapter into mains powerConnect the adapter to a wall outlet matching your plug type. The LEDs inside the C should illuminate, and the electromagnet activates.
- Position the globe in the levitation gapPlace the globe in the gap between the two arms of the C. It should then float and turn freely.
Why the globe drops
Practical tips for a stable float
- Place the base on a flat desk or table.
Daily use, care, and maintenance
Once the globe is floating, it turns freely on its own. You can give it a gentle spin, but do not push it hard or knock it out of position. If it drops, pick it up and place it in the gap again.
The black base collects dust along the inner curve where the LEDs sit. Wipe it with a dry microfiber cloth when the base is unplugged and cool. Do not use liquid cleaners on the base or the LED strip. The globe itself can be wiped with the same cloth. If you need to move the lamp, remove the globe first, then carry the base. Transporting the base with the globe floating risks dropping and scratching the globe.
Safety and placement considerations
The lamp runs on 12 V DC from a mains adapter, so the base itself carries low voltage. The adapter, however, connects directly to wall power. Route the cable so it does not hang off the edge of the desk where someone could snag it and pull the base down. Do not place the lamp near cribs, cots, or bassinets, and do not leave the cord accessible to infants or young children. The cable and small globe present entanglement and choking hazards.
The base generates a magnetic field, so keep magnetic cards, mechanical watches, and sensitive electronics away from it. The lamp carries CE and ROHS certifications. It originates from Mainland China.
If you already have other low-voltage decorative devices on your desk, the floating globe fits in naturally. It pairs well with pieces like a sunrise alarm clock for layered ambient lighting. For broader smart-home setups, the globe is a standalone accent piece rather than a connected device, so it will not appear in your home automation system. If you are building out a room with multiple ambient light sources, browse the site's lighting category for additional options that complement it.
What the lamp is and is not
FAQ
- Does the lamp run on batteries?
- No. The lamp runs on AC power through a mains adapter that steps down to 12 V DC via a round jack on the back-left of the base. There are no batteries included or needed.
- Is it bright enough to read by?
- No. The luminous flux is under 60 lm, which is accent-lighting level. It adds a glow to a desk or shelf but will not illuminate a book or workspace.
- Is it a smart device I can control with an app?
- No. The lamp has no app, no Wi-Fi, no Bluetooth, and no smart features.
- What plug type should I choose?
- Choose the plug type for your country. The lamp is available with US, EU, UK, or AU plugs, and the adapter handles both 110 V and 220 V supplies.
- No. Do not place the lamp near cribs, cots, or bassinets, and do not leave the cord accessible to infants or young children. The cable and small globe present entanglement and choking hazards.